Stainless Steel Seamless Tube For Heat Exchanger Applicaiton EN 10216 / 5 TC 2 Grade 1.4401, 1.4404 , 1.4571

Stainless Steel Seamless Tube for heat exchanger applicaiton EN 10216 / 5 TC 2 Grade 1.4401, 1.4404 , 1.4571

Detail:

1 Standard: ASTM A213/ASME SA213, ASTM A789, ASME SA789 , SB677

2 Material: TP304/304L , TP310S/310H, TP316/316L,TP316Ti, TP317/317L, TP321/321H, TP347/347H,

3 OD:6mm-152mm

Thickness: 0.6mm-30mm

4 Certificate: PED, GOST, ISO

SIZE RANGE :

MAIN STEEL TYPE AND GRADE :

MAIN PRODUCTION STANDARDS:

Stainless Steel Seamless Pipe/ Tube:

1.A999/A999M: Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test, the pipe of test to be used shall be at the option of the mfg, unless otherwise specified in the PO.
2. The Pipe lengths : Unless otherwise agreed upon, all size from NPS 1/8” TO AND INCLUDING nps 8 are available in a length up to 24ft with the permitted range of 15 to 24 ft. Short length are acceptable and the number and min, length shall be agreed upon between mfg and purchaser.
3. The finished pipe shall be reasonably straight and shall have workmanlike finish, Removal of imperfections by grinding is permitted, provided the W.T are not decreased to the less than the permitted in Section 9 of Specification A999/A999M
4. Butt Weld End: According to ANSI B 16.25
5. Pipe Marking: Specified in A999/999M, include “Logo(YHSS)+Standard+SIZE+Heat No.+Lot No.+H.T/E.T/U.T”
6. Packing: Each Pipe end is protected by Plastic cap. Then packed by Anti-rust steel strip, The outside of the bundle is plastic woven bag, or Plastic film.
7. Packing Mark: SIZE + STEEL GRADE+ QTY OF PIECE/WEIGHT/METRE.
8.MTC: BWSS Official Original MTC paper will be supplied for each order.

1.4401 Stainless Steel Seamless Tube

1.4571 Stainless Steel Seamless Tube

1.4404 Stainless Steel Seamless Tube

Stainless Steel Seamless Tube For Heat Exchanger Applicaiton EN 10216 / 5 TC 2 Grade 1.4401, 1.4404 , 1.4571 Images